The eFlow®rapid nebuliser system with new eBase Controller is suitable for the treatment of a wide range of diseases of the lower airways. It stands for efficient, safe and fast inhalation treatment, combined with even more advantages:
1 Naehrig S et al. Eur J Med Res 2011; 16(2): 63-6
Aerosol characteristics of the eFlow®rapid nebuliser system
MMADa): 4,6 µm
Respirable Fractiona) < 5 µm: 55 %
Aerosol Output Rateb): 0,5 g/min
Aerosol data according to ISO 27427; nebulised medium: Salbutamol 2.5 ml. Measured values may vary depending on the medication used. Recommended fill volume: see package leaflet for the medication.
a) Measurement with Next Generation Pharmaceutical Impactor (NGI) at 23 °C and 50% relative humidity. Inspiratory flow: 15 l/min
b) Measurement with breathing simulator at 23 °C and 50 % relative humidity. 500 ml breathing volume, breathing frequency 15 cycles/minute, sinusoidal breathing pattern, inhalation/exhalation ratio 1:1 (with adults, may vary in children).
For more technical information please see the Instructions for use.
Click on the video links below to find out more about the topics listed. Please always follow the respective instructions for use.
Service is essential to keep medical equipment operational and safe. Our Nordic service team consists of experienced service technicians stationed across the Nordic countries. Our service technicians are ready to take on your every service need.”
Sentec Digital Monitor (SDM) with activated PO2 channel for tcPCO2, tcPO2, SpO2, PR and HP monitoring
The Sentec Digital Monitoring System with PO2 (SDMS-PO2) provides continuous and non-invasive real-time monitoring of ventilation (tcPCO2), oxygenation (tcPO2) and Heating Power (HP) for neonatal patients. In pediatric / adult patients, the system can be used for tcPCO2, tcPO2, SpOI2, Pulse Rate, Pulsation Index (PI) and HP monitoring.
Transcutaneous monitoring (TCM) provides clinicians with greater insight to quickly identify trends, rapidly and accurately assess patient status, and make more well-informed, timely care decisions.
Meeting the needs of medical staff and patients
The Vivo 55 is an advanced homecare ventilator designed to deliver secure and comfortable treatment to patients from 10 kg. The Vivo 55 can be used for a wide variety of patients, both life-support and non life-support, thanks to a comprehensive set of modes, circuits and accessories.
The Vivo 55 is designed to meet the needs both of medical staff and a wide range of patients. It combines comfortable and controllable ventilation with excellent monitoring capabilities to potentially reduce readmissions to acute care facilities. The extensive monitoring capabilities help obtain a better insight into the quality of ventilation. The Vivo 55 is an excellent choice for mechanical ventilation at home, in the hospital and in long-term care facilities. The Vivo 55 is prepared for connection to Breas cloud solutions.
Portable hospital spirometer
AioCare is a professional system to monitor and treat pulmonary diseases, consisting of a portable hospital-grade spirometer connected to a smartphone app and an online panel to access the results. The device enables a full spirometry test to be conducted in a doctor’s office, including a bronchial challenge workflow. If monitoring needs to go beyond the healthcare system, AioCare may be used for patients at home.
Untethered six-minute walk test
Vyntus™ WALK allows patients to perform an untethered six-minute walk test (6MWT) by wearing wireless sensors that communicate data to a technician-held tablet PC. Standardize testing to the recommended is 6MWT protocol, because consistent testing yields consistent data for comparison
The system is both patient- and technician-friendly and because we know a single sensor does not fit all clinical needs, comes with an array of easy-to-wear sensors. Because standardizing the complete testing process is critical to meaningful data for patient trending, Vyaire has integrated the complete ATS testing standards in the workflow-driven tablet software application.
